Drilling in Prescott Valley, Arizona
The first step of this slab lifting process, called the PolyLevel® Repair System, is to drill some holes in specific areas of the floor. The trick is to slowly inject the poly material until it gets evenly distributed.
PolyLevel® Repair System Process: The Importance of Distance
Each hole must have a specific distance between each other to evenly distribute the foam material while injecting.
PolyLevel® Repair System Process: No Time for Leaks
The black hose in the image got used to successfully inject the Poly material into the slab. The type of hole is very special since the material needs to be hot when injecting there cannot be any leaks.
PolyLevel® Injection Foam System: Injecting Time
The is the end of the black hose, and as shown in this photo, our home heroes are about to inject the magical material into the slab to lift it.
After PolyLevel® Injection
This is what a floor after PolyLevel® repair System looks like. The floor is even and will no longer be in danger of cracking because of the voids between the foundation and the ground.