Expert Foundation Repair Contractors Serving Joseph City, AZ

In the desert landscapes of Arizona, residential foundation issues are common due to the region's volatile soil conditions. Moisture fluctuations in the bearing soils often cause foundation settlement, leading to cracks and structural damage. This story takes place in Joseph City, AZ, where a homeowner faced significant foundation problems after a water pipe broke underground near their home, causing the foundation to settle and crack.

The Problem:

A homeowner in Joseph City, AZ, noticed stair-step cracks along the south and west sides of their 2800 sq. ft. house. The master bedroom walls showed widening gaps, a sign that the foundation had settled unevenly. The culprit? A broken faucet pipe that leaked right up against the slab-on-grade foundation, causing soil beneath to shift and settle. Though the pipe leak was fixed, the damage to the foundation persisted. The homeowner, understandably concerned, sought a solution that would stabilize their home and prevent further settling. They wanted the foundation lifted back to its original position, closing the visible gaps and restoring the home's structural integrity.

The Solution:

The homeowner contacted Arizona Foundation Solutions, experts in foundation repair, to assess the situation. After conducting a thorough manometer survey to understand the extent of the settlement and affected areas, it was determined that push piers would be the most effective solution. These hydraulically driven piers are designed to bypass problem soils and provide deep, stable support by reaching load-bearing strata far below the surface.

Foundation Repair Process:

Diagnosis and Repair Plan:

The foundation inspection revealed that the addition to the house was most affected by the pipe leak, causing one corner to sink significantly. To restore the foundation, the team decided to install push piers around the settled area, with the goal of lifting the house back to its original level.

Excavation of Pits:

Small pits, measuring 3 feet in width, length, and depth, were excavated at strategic points around the affected corner of the house. These pits would house the steel push piers.

Pier Bracket Installation:

The foundation’s footing was trimmed, and heavy-duty steel brackets were securely attached to support the push piers.

Driving Push Piers to Stable Bedrock:

Using hydraulic rams capable of exerting up to 70,000 lbs. of force, the team drove steel shafts deep into the ground until they reached load-bearing bedrock. This process ensures that the foundation can rest on stable ground, eliminating the risk of further settlement.

Foundation Lifting:

With the push piers in place, the team used hydraulic jacks to lift the settled corner of the home. The lifting was done gradually to avoid any additional stress on the structure, and the visible gaps began to close as the foundation was carefully raised.

Final Adjustments and Backfilling:

Once the home was lifted to its desired level, the push piers were cut to the correct height, and the pits were backfilled. The landscape was restored, leaving no visible signs of the foundation repair process.

Outcome and Peace of Mind:

The homeowner's main concern was the continuing settlement and the visible damage caused by the shifting foundation. After the foundation repair, the stair-step cracks were closed, and the master bedroom no longer showed signs of movement. The push piers provided a permanent solution, stabilizing the home and giving the homeowner peace of mind that their foundation issues were resolved. With their home once again level and secure, they could move forward without the fear of further damage.

Customer Expectations Met:

The homeowner was relieved to see the gaps closing and the house lifting to its original position. While complete perfection was difficult given the severity of the initial settlement, the push piers provided a long-lasting solution. The homeowner appreciated the professionalism of Arizona Foundation Solutions and was satisfied that their foundation was now properly supported for the long term.

A homeowner in Joseph City, Arizona, noticed extreme cracks forming in their 3,500 sq. ft. home, built in 1982. The property included a basement and a slab-on-grade section, with significant settlement signs, especially in the living room area. These cracks, combined with visible shifts in the walls, were clear indicators of foundation settlement. The homeowner was concerned about the structural integrity of their living room and wanted to address the issue before remodeling the home for their family.

Upon inspection, it was determined that the slab portion of the home was settling due to changes in the moisture levels of the bearing soils. To prevent further damage and stabilize the structure, a solution involving 10 push piers was recommended. These hydraulic piers would be driven deep into load-bearing strata to halt the settlement and lift the foundation back into place if possible.

The Foundation Piering Process

Foundation Analysis and Repair Plan: A detailed inspection, including a manometer survey, was conducted to diagnose the extent of the settlement. Based on this data, the use of push piers was determined to be the most effective solution.

Excavation: Pits, each 3 ft. wide, long, and deep, were excavated at the designated locations around the home to receive the push piers.

Preparation of Footing: The foundation’s footing was trimmed to properly install the heavy-duty steel brackets needed for the piers.

Pier Installation: Hydraulic push piers were installed by driving them to bedrock or stable load-bearing soil, bypassing the problematic, shifting surface soils.

Lifting and Stabilizing the Structure: Once the piers reached the necessary depth, the foundation was carefully raised using hydraulic jacks. The living room, the most affected area, was a priority for leveling and stabilization.

Cutting and Final Adjustments: After the structure was leveled, the piers were trimmed to the appropriate height, ensuring the foundation was stable and secure.

Backfilling and Restoration: The pits were backfilled, and efforts were made to restore the landscape, leaving no visible signs of the installed piers. The push piers remain hidden but continue to support the foundation.

Outcome

The installation of push piers successfully stopped the settlement in the living room, allowing the homeowner to proceed with their planned renovations. The foundation was now secure, ensuring the home would remain stable for future generations. The homeowner could now remodel the space with confidence, knowing the structure was safe and sound.

A homeowner in Joseph City, AZ, noticed significant issues with their home’s foundation. After a pipe leak occurred just 3 feet from the house, the soil beneath the southern and western sections of the foundation had eroded, causing one corner of the home to settle. This settlement led to stair-step cracks on the exterior walls and cracks inside the master bedroom. The homeowner had fixed the pipe leak, but the damage to the foundation remained, and they were worried that the problem would continue to worsen if not addressed.

Their goal was clear: they needed to lift and level the corner of their home that had settled due to the leak, hoping to close the gaps and prevent further damage.

The Problem: Foundation Settlement Due to Soil Erosion

Concrete is a heavy material, and it depends on stable soil to support the structures built on top of it. In this case, the pipe leak had caused the soil beneath the foundation to wash away, creating voids and weakening the soil's ability to bear the weight of the home. As a result, the foundation began to settle unevenly, leading to visible cracks and uneven flooring. Without intervention, this would likely lead to further structural damage.

The Solution: PolyLevel® Injection Foam

To address the foundation settlement, PolyLevel® Injection Foam was recommended. PolyLevel® is a lightweight, high-density foam that can lift and level sunken concrete slabs by filling voids in the soil. The process is precise and non-invasive, making it an ideal solution for lifting the settled corner of the home without the need for heavy equipment or extensive excavation.

Why PolyLevel® Was the Right Choice

Non-Invasive: The PolyLevel® foam is injected through small holes drilled in the affected area, which means minimal disruption to the property. This was important for the homeowner, as they wanted a solution that wouldn’t involve large-scale digging or damage to their home.

Fast Curing: PolyLevel® cures quickly—usually within 15 minutes—allowing the slab to be lifted and stabilized rapidly. The homeowner needed a fast solution to prevent further settlement, and PolyLevel® provided just that.

Lightweight but Strong: Unlike traditional methods like mudjacking, PolyLevel® is much lighter, weighing just 4 lbs. per cubic foot. This was crucial in this case, as adding extra weight to the already compromised soil would only exacerbate the problem.

Waterproof and Durable: Given that the initial problem was caused by a pipe leak, the homeowner needed a solution that would withstand moisture. PolyLevel® is waterproof and stable, meaning it won’t wash away or break down over time, providing long-term support for the foundation.

The Outcome: A Stable and Safe Home

The PolyLevel® injection process effectively lifted the sunken corner of the home, closing the gaps and stabilizing the foundation. The stair-step cracks in the exterior walls stopped progressing, and the unevenness in the floors was reduced significantly. The homeowner now has peace of mind knowing their foundation is secure and protected from further damage.

When Mary first noticed cracks forming in her mother’s home, she didn’t think much of it. The house, built in 1982, had withstood the test of time, but now the shifting walls and widening cracks were impossible to ignore. The once-sturdy foundation seemed to be sinking, and the uneven floors only worsened the situation. With a basement showing signs of damage and large areas of the concrete slab visibly settled, it was clear that something had to be done before the structural integrity of the home was compromised.

Mary’s goal was to find a solution that could stabilize the 3,500 square-foot home without requiring an expensive and disruptive replacement of the entire slab. The challenge was to lift and level the sinking concrete while ensuring long-lasting stability in the unstable Arizona soil.

After researching traditional methods like mudjacking, which seemed too invasive and slow, Mary found PolyLevel® Injection Foam offered by Arizona Foundation Solutions. The PolyLevel® method promised not only to raise the settled slabs but also to strengthen the underlying soil, offering a durable solution to her mother’s shifting foundation.

On the day of the repair, the crew from Arizona Foundation Solutions arrived promptly, assessing the damage and formulating a plan to restore the home’s foundation. They explained to Mary how the PolyLevel® system would work, injecting a lightweight but incredibly strong expanding foam beneath the sunken areas. Unlike mudjacking, which could add unnecessary weight to already weak soil, PolyLevel® is only 4lbs per cubic foot, making it ideal for homes like Mary’s mom's, where the soil had already compressed under the weight of the slab and structure.

The process began with small, precisely drilled holes in the affected areas of the concrete slab. Through these access points, the technicians injected the PolyLevel® foam. As the foam expanded, it filled the voids beneath the slab, gradually lifting and leveling the sunken sections of the house. Within 30 minutes of the foam injection, the slab had been raised to its original position, and the cracks in the walls began to close. The foam reached 90% of its final strength almost immediately, allowing the foundation to be fully stabilized by the end of the same day.

Mary was relieved to see the transformation. What once seemed like a major foundation crisis was resolved quickly and effectively with minimal disruption. Unlike traditional methods, PolyLevel® cured rapidly, allowing the house to be fully usable again within hours. The basement floor was level, the walls realigned, and the home now felt solid and safe again.

This experience showed Mary how modern innovations in concrete lifting, like PolyLevel®, can restore homes efficiently, affordably, and with minimal hassle. With PolyLevel®’s waterproof, non-invasive, and soil-strengthening properties, she had peace of mind knowing her mother’s home was safe from further damage. She also felt confident recommending the service to others experiencing similar issues in Joseph City and across Arizona’s desert towns.

For homeowners like Mary and her mother, dealing with settled concrete can be stressful, but with PolyLevel®, they found a fast, cost-effective, and lasting solution that not only lifted their sunken slab but also strengthened the foundation for years to come.

Need your concrete lifted and leveled? Contact Arizona Foundation Solutions today for a free estimate and see how PolyLevel® can restore stability to your property.

In Joseph City, AZ, a homeowner faced a concerning issue with their 2800 sq. ft. home. The south and west corners of the house began to settle noticeably due to an underground pipe leak near a faucet just three feet from the house. This settling had caused stair-step cracks on the exterior and continued movement in the master bedroom, resulting in visible gaps. Fearing that the damage would worsen, the homeowners sought a long-term solution to raise the corner and prevent further structural instability. Their main goal was to lift and level the back corner, eliminate the gaps, and regain peace of mind, knowing their home would be stabilized for years to come.

Challenge: The primary challenge was the significant settlement that occurred from the pipe leak, compromising the foundation's integrity and creating an uneven floor. The shifting had already caused cracks to form inside and outside the home, and the homeowner could feel the difference while walking across the affected areas. Without timely intervention, the damage could spread, causing even more serious structural issues. The homeowners were particularly concerned about the concrete raising cost and wanted a solution that would be both efficient and cost-effective. Their expectations were high— they needed a concrete lift to close up the gaps, restore stability, and ensure they wouldn’t feel the unevenness underfoot anymore.

Solution: After evaluating the situation, it became clear that PolyLevel® foam injection was the ideal method for concrete lifting. The lightweight but strong PolyLevel® foam would be used to lift the settled slab without adding excessive weight to the already compromised soil, making it a far superior option to traditional concrete jacking techniques. This foam that lifts concrete expands quickly and effectively to fill voids and stabilize the underlying soil.

The highly experienced team began by drilling small, strategically placed holes in the slab near the settled corner. Through these holes, the two-part PolyLevel® foam was injected beneath the slab. As the foam expanded, it exerted a controlled upward force, lifting the concrete and closing the noticeable gaps that had formed due to settlement. Unlike other methods like mudjacking, the polyurethane concrete lifting cost was lower, and the process was quick and non-invasive, allowing for precise adjustments to meet the homeowner’s needs. Within minutes, the foam began to stabilize the foundation, leveling the slab and minimizing further movement.

Outcome: The results of this concrete slab lifting project were immediate and impressive. The gaps in the foundation were successfully closed, and the corner of the house was leveled, allowing the homeowners to walk across the floor without noticing any unevenness. The use of PolyLevel® also provided peace of mind, as it stabilized the soil beneath the home and prevented future settling, especially in areas prone to water leaks and erosion.

With the job completed in just a few hours and the area ready for use within minutes of finishing the injections, the homeowners were thrilled with both the efficiency and the cost-effectiveness of the project. The concrete lifting cost was significantly lower than more invasive alternatives, and the polyjacking cost was within their budget. The homeowners were relieved to know they had made a smart investment in protecting their home from further damage.

The success of this project in Joseph City, AZ, showcased the power of concrete foam leveling as a fast, durable, and non-disruptive solution. The results were long-lasting, ensuring that the home’s foundation remained secure while minimizing any future concerns about settlement.

In Joseph City, Arizona, a homeowner was facing a serious issue with their living room. Over time, the floor had begun to settle due to soil erosion and instability beneath the concrete slab. As the most-used area in the home, this room held significant importance not just for day-to-day living, but also as the focal point of an upcoming remodel. The homeowner’s primary concern was ensuring their family's safety and maintaining the structural integrity of their home, especially since they planned to leave the house in good condition for their family.

Challenge:

The challenge was twofold: the floor in the living room had significantly settled, creating an uneven and potentially hazardous surface. This made the space feel unsafe, and the homeowner was concerned that the problem could worsen if not addressed. In addition, any attempt at remodeling would be futile unless the settling issue was resolved. The homeowner's key objective was to stop the settling and, if possible, lift the floor back to its original level. The fear of the ceiling eventually "falling on their head" underscored the urgency of the project.

Solution:

Arizona Foundation Solutions responded to the challenge by using PolyLevel® injection foam, a highly effective concrete leveling solution. This innovative method allowed for precise concrete lifting and leveling of the slab floor without the need for invasive and time-consuming alternatives like traditional mudjacking or replacing the slab entirely.

First, technicians drilled small holes into the concrete slab and injected the PolyLevel® foam beneath the surface. The foam expanded, filling any voids and stabilizing the loose soil beneath. This process effectively provided a lift for the concrete in the living room, which leveled out the slab and halted the ongoing settlement.

PolyLevel® was selected for its lightweight yet powerful lifting capability—perfect for addressing the homeowner’s concerns without adding further weight to the already compromised soil. The foam not only raised the concrete slab, but also cured within minutes, making the space usable almost immediately. By the end of the process, the living room floor was level, stabilized, and ready for the planned remodel.

Outcome:

The results were both immediate and long-lasting. The concrete floor leveling process successfully stopped the settling, and the floor was lifted back to a level position, restoring the room’s safety and usability. The homeowner could now proceed with the remodeling project, confident that their living room’s foundation was secure.

Moreover, the concrete lifting cost was a fraction of what it would have been with alternative methods, and the minimally invasive nature of PolyLevel® meant that the entire process was completed quickly and cleanly. The homeowner was thrilled with how fast the repairs were completed, as downtime was minimized, allowing them to move forward with their renovation plans.

The project demonstrated the effectiveness of PolyLevel® concrete raising technology in stabilizing and leveling a concrete slab, ensuring safety and longevity. As a result, the homeowner was left with peace of mind, knowing that their home was now structurally sound and ready for the next chapter.

In Joseph City, AZ, a family residing in the area encountered troubling foundation settlement issues within their patio, resulting in a hazardous situation. Concerned about the safety of their home, they actively sought out reliable solutions and discovered the efficient PolyLevel Service offered by Arizona Foundation Solutions, a leading residential foundation contractor in the region.

Upon contacting AZFS, the homeowners were promptly assisted by a dedicated inspector who specialized in house foundation concerns. Recognizing the urgency of the matter, the inspector conducted an express foundation inspection to pinpoint the precise issues affecting the concrete slab. The inspection revealed the need for concrete lifting to address the tripping hazard.

The foundation specialist from Arizona Foundation Solutions skillfully navigated the task of selecting suitable injection locations, ensuring a meticulous process for concrete leveling. With expertise in poly jacking concrete, the team utilized cutting-edge techniques to lift the sunken concrete slab efficiently. The concrete leveling service near Joseph City, AZ, involved the use of concrete leveling foam, a high-quality material carefully injected to raise the foundation.

The process included monitoring the foam expansion with precision, avoiding any potential damage during the concrete repair. The driveway lifting was carried out seamlessly, showcasing the professionalism of the concrete lifting company. The successful completion of the task not only eliminated the tripping hazard but also highlighted the commitment of Arizona Foundation Solutions to providing quick and professional services, regardless of the size of the job.

This pivotal decision marked the beginning of the homeowners' journey to restore their home's structural integrity. The experienced and dedicated professionals at Arizona Foundation Solutions initiated a comprehensive assessment to identify the root causes of the foundation problems in Joseph City, AZ. Armed with a clear understanding of the issues, they devised a tailored foundation repair plan, emphasizing the importance of proper foundation leveling.

Throughout the process, the team at Arizona Foundation Solutions proved their commitment to excellence, ensuring the peace of mind and satisfaction of the homeowners. This successful intervention not only addressed the immediate concerns but also contributed to the longevity of the cherished residences in Joseph City, AZ.

In Joseph City, Arizona, a concerned homeowner discovered distressing signs of foundation damage in their residence, including troubling cracks and structural issues. Recognizing the urgency and severity of the situation, they wisely decided to seek the expertise of Arizona Foundation Solutions, a reputable team of residential foundation repair contractors near Joseph City, AZ.

The professionals at Arizona Foundation Solutions, specializing in house foundation repair and foundation crack repair near Joseph City, AZ, initiated a thorough examination of the property. Their express foundation inspection allowed them to pinpoint the root causes of the foundation problems. With a deep understanding of the issues, the foundation specialists near Joseph City, AZ, were able to formulate a customized foundation repair plan to address the homeowner's concerns.

The foundation repair plan involved the installation of house foundation piers, a crucial step in resolving sinking foundation issues. This comprehensive approach ensured not only the immediate repair of foundation cracks but also the long-term stability and durability of the home.

The homeowners were relieved to have found foundation contractors who could handle the foundation lifting near Joseph City, AZ, and were impressed with the meticulous foundation work performed by Arizona Foundation Solutions. Their dedication and expertise in residential foundation repair near Joseph City, AZ, not only restored the structural integrity of the home but also provided lasting peace of mind for the homeowners.

In the end, Arizona Foundation Solutions proved to be the go-to foundation repair company near Joseph City, AZ, delivering effective solutions for any foundation-related concerns.

In Joseph City, AZ, a resident faced a pressing concern with the foundation of their house. Troubling settlement issues, manifested as cracks on the floors, walls, and ceiling, permeated various areas, including the garage and patio. Recognizing the severity of the problem, the homeowners set out to locate reputable residential foundation repair contractors in Arizona.

Their quest led them to Arizona Foundation Solutions, the go-to experts for foundation repair in Joseph City, AZ. The seasoned foundation specialists from this local company responded promptly to the distressed family's call. Conducting an express foundation inspection, the team identified the need for a comprehensive solution tailored to the unique challenges of the house.

Following the inspection, Foundation Specialist recommended a thorough topographic analysis to formulate an effective plan. Multiple house foundation piers were strategically installed in various rooms, ensuring comprehensive support for the entire structure. The foundation contractors worked tirelessly for days, expertly lifting and stabilizing the house foundation in Joseph City.

The homeowners were overjoyed to witness the successful outcome, with their once-troubled foundation now more robust than ever. Arizona Foundation Solutions delivered on their commitment to providing fast and efficient foundation repair, addressing the settlement issues that had plagued the residence.

For top-notch house foundation repair in Joseph City, AZ, residents trust Arizona Foundation Solutions, the local experts dedicated to securing the foundation of every home. Their expertise and commitment shine through, offering peace of mind to homeowners in need of reliable foundation repair services.