Symptom of a Settlement Foundation Problem
As you can see, the walls were separating from the floor due to the settlement foundation problem in this house down in Tucson, AZ.
PolyLevel® Repair System Process: Drilling Time
Our home heroes, in order to inject the PolyLevel® material, need to drill a few holes in different locations in the affected area caused by the settlement problem.
PolyLevel® Repair System Process: Injecting Time
After Drilling the holes, our professionals will use a black hose o inject the PolyLevel® material into the ground to lift the floor again.
After PolyLevel® Injection - 1
As seen in this photo, the carpet was put back into place with no doubt that the floor will not sink any more.
After PolyLevel® Injection - 2
Here is another picture of another area of the house where it was negatively affected by the settlement foundation problem.