Settlement or/and Heaving Symptoms
As you can see in the picture, there is a big gap between the floor and the actual bottom of the wall. On many occasions, there is more than one wall affected.
Symptoms of Foundation Problems
Here is another photo from a different wall showing symptoms of foundation problems. you can fit a tennis ball in the space gap of the wall and the floor.
Before PolyLevel® System Repair
This is another angle of the wall in which is the gap space is more noticeable. PolyLevel® is very effective when it comes to this type of concrete slab foundation problem because it is affordable, adjustable, eco-friendly, strong, lightweight, and a permanent solution.
Pre-Poly Injection Steps
Before injecting PolyLevel®, holes need to get drilled at the same distance, and the PolyLevel® needs to get prepared. In this photo, one of our heroines is about to inject the miraculous material.
Intra-Poly Injection Steps
Here is another photograph of our heroine smashing the floor to prevent the material from getting stuck in the bottom part of the floor. The reason for that is if the PolyLevel® gets attached to the substructure of the floor before the voids get fulfilled first, it will prevent the upcoming material to go deeper. Slightly striking the floor helps the material to spread and expand more efficiently.
Signs of Improvement
The blue tape on the concrete cracks tells us how much the surface is raising. Another factor to consider is how bad the settlement was and the heave, as well.
Post-Poly Injection
As you can see, the result is very noticeable there are no more space gaps between the wall and the floor.
After PolyLevel® System Repair
This is the result of PolyLevel® injection system repair. As shown in the picture, the space gap between the floor and the wall already disappeared. Just like this example, Arizona Foundation Solution counts with many other testimonials from most parts of Arizona.