Underpinning in Prescott, AZ
The first step for underpinning after selecting the location of each pier is to dig a hole right next to the house's foundation. Sometimes our home heroes need to use heavy machinery to cut concrete and clear the space before digging the hole with the help of excavators.
Underpinning Process: Is Depth important?
The depth of each hole is crucial for the underpinning system installation to work properly.
Underpinning Process: Is distance Important?
Another important factor is the distance between each pier. Depending on the house's needs, some piers cannot be too separated or too close to each other.
Underpinning Process: Piers Before Getting Drilled
Here is a picture of some of the piers before getting installed. As seen in this image, the excavators are getting ready to drill the pier into the ground.
Underpinning Process: Proactivity is Key
Our home heroes need to be very careful when digging because they do not want to break any pipes or anything that might affect the house's functionality.
Underpinning Process: Drilling & The Importance of the Angle
Here is a picture of a pier halfway through the drilling process. The angle of the pier is crucial because it needs to be as vertical as possible.
Underpinning Process: Time to Finish
In this picture, the pier got already installed, and our professionals just need to put back the dirt they dug.
Underpinning Process: Always Full Support
The angles and position of the pier are critical to providing full support to the house's foundation. If one pier does not get properly installed, the other piers will suffer more stress than they should and might eventually fail.
After Underpinning Installation - 1
Here is a photo of the house after the Underpinning installation process.
After Underpinning Installation - 2
When our home heroes need to cut the concrete to clear the space and start digging, they need to repel the concrete by pouring fresh cement to fulfill the area.