Photo Album: Foundation Problem: SOLVED!

The owners of this a single-family ranch style home located in Prescott AZ reached out to us after noticing symptoms of a foundation problem. Specific symptoms included drywall cracks, interior and exterior wall cracking as well as cracks in the ceiling! A Forensic Engineering Report was produced after completing a level B foundation inspection. Both foundation heave and Foundation settlement were noted. To address the foundation heave, our patented MoisuteLevel Smart Foundation System was recommended. The MoistureLevel System is both peer and engineered reviewed. This foundation repair solution also comes with a written warranty. Contact us to schedule your free level A foundation inspection!

Diagonal Dry Wall Cracks

Dry wall cracks like this are a common symptom of a foundation problem.

Interior Ceiling Cracks

Interior ceiling cracks are another symptom of a foundation issue.

Foundation Underpinning - After

The front of this Prescott, AZ home after it has been underpinned.

Foundation Underpinning - Before

The front of this Prescott, AZ home before it has been underpinned

Prescott Foundation Repair - After

The side of this Prescott, AZ home after the foundation supports were installed.

Prescott Foundation Repair - Mid Underpinning

The side of this Prescott, AZ home as the foundation supports were installed.

Excavating

All areas where the repair plan has called for a foundation support pier to be installed will need to be excavated.

Topo Map - Side View

The areas out of level stand out even more in the side view of the topographical map.

Topo Map

The data gathered from the floor level read plots the elevation of the foundation.

MoistureLevel Uptake

The moist air responsible for the foundation heave will be suctioned from under the home's foundation, through this tube and out of the house!

MoistureLevel Unit - Attic Install

The vacuum portion of the MoistureLevel Smart Foundation System is placed in the home's attic. This system runs on a sensor and will only turn on when moisture level reach the programmed level,.